食品级TPE原料 透明 -XSK 厂家直销TPE包胶ABS
产品编号:
50T-15
产品描述
桶装水盖专用材料,普通级通用
50T-15是一款经济型半透明材料,具有优异的耐刮擦效果。
50T-15 is a kind of economical and translucent material which has excellent scratch resistance property.
50T-15是一款经济型半透明材料,具有优异的耐刮擦效果。
50T-15 is a kind of economical and translucent material which has excellent scratch resistance property.
关键特性Key characteristic
1.表面哑,手感细腻柔软Dumb surface, exquisite and soft touch.
2.粘接强度非常高,可粘接材质:PP,PE. Very high bonding strength,adhesive materials:PP and PE.
3.成型快、不粘模具Rapid molding and non-stick mold.
4.表面耐刮擦,不易起毛屑Scratch resistance on the surface,not easy to fluff.
1.表面哑,手感细腻柔软Dumb surface, exquisite and soft touch.
2.粘接强度非常高,可粘接材质:PP,PE. Very high bonding strength,adhesive materials:PP and PE.
3.成型快、不粘模具Rapid molding and non-stick mold.
4.表面耐刮擦,不易起毛屑Scratch resistance on the surface,not easy to fluff.
产品应用 饭盒盖包胶Rubber coating of lunch-box cover
Main application 玩具产品Toy products
加工方法Processing method 注塑成型Injection molding
环保认证 FDA ROHS REACH EN71-3 PAHS ASTM-F963 Phthalate
Environmental certification
颜色Color: 半透明 Translucent
气味Smell : 少许树脂味A little resin smell
外型Appearance: 圆球形小颗粒Cylindrical particle,about 3mm×1.5mm
储藏期Storage period: 常温下通风干燥,24个月Ventilated dry at normal temperature,about 24 months
包装方式Packaging method: 25公斤/袋 25kg/bag
Environmental certification
颜色Color: 半透明 Translucent
气味Smell : 少许树脂味A little resin smell
外型Appearance: 圆球形小颗粒Cylindrical particle,about 3mm×1.5mm
储藏期Storage period: 常温下通风干燥,24个月Ventilated dry at normal temperature,about 24 months
包装方式Packaging method: 25公斤/袋 25kg/bag
物理性能Physical properties
比重Specific gravity 0.92±0.02g/cm3
硬度Hardness 47±5shoreA
拉伸强度Tensile strength >3Mpa
断裂延伸Elongation at break <650%
撕裂强度Tearing strength >14Kn/m
熔融指数Melt index >3g/10min
比重Specific gravity 0.92±0.02g/cm3
硬度Hardness 47±5shoreA
拉伸强度Tensile strength >3Mpa
断裂延伸Elongation at break <650%
撕裂强度Tearing strength >14Kn/m
熔融指数Melt index >3g/10min
注意事项Matters need attention:
清洗料管 Purge compound:
需使用PP或 PE清洗干净机台螺杆,且把机台射嘴彻底清除干净.
Please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean.
清洗料管 Purge compound:
需使用PP或 PE清洗干净机台螺杆,且把机台射嘴彻底清除干净.
Please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean.
着色Coloring:
请选择以PE或EVA为基材之色母,切勿使用以PVC为基材者。另外加工时请采用较高的螺杆转速和较高的背压,才能让着色剂达到较好的分散效果Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed and backpressure are needed for better colorant dispersion.
请选择以PE或EVA为基材之色母,切勿使用以PVC为基材者。另外加工时请采用较高的螺杆转速和较高的背压,才能让着色剂达到较好的分散效果Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed and backpressure are needed for better colorant dispersion.
搜索
↵Copyright © 2021 广东塑伯新材料有限公司
All Rights Reserved. 粤ICP备2020127300号
销售热线:400-800-0302 手机:13602342196 电话:0752-6768128 传真:0752-6768088
地址:广东省惠州市博罗县石湾镇黄西工业园径二路 邮箱:sales@tpe-sp.com 网址:www.tpe-sp.com