TPE双色注塑食品级 TPE粘PE 桶装水瓶盖原料厂家直供ES7501H

ES7501H是一款高端的透明材料，具有优异的耐刮擦，耐候性和特别舒适的手感。易成型。 ES7501H is a high-end transparent material, has excellent scratch resistance, weatherability and comfortable feel. Easy molding.

产品描述

各大塑胶制品行业都在用的TPU-性价比超高

塑伯TPU拥有超过16年研发生产经验,在东莞设立TPU研发基地通过ISO9001:2008质量管理体系认

產品說明Product description
·ES7501H是一款高端的透明材料，具有优异的耐刮擦，耐候性和特别舒适的手感。易成型。 ES7501H is a high-end transparent material, has excellent scratch resistance, weatherability and comfortable feel. Easy molding.
關鍵特性Key characteristic
表面哑，手感细腻柔软。surface dumb, soft feel. 高强度，成型快high strength, forming fast 耐温，耐候性能好heat resistance, good weather resistance 可以包胶PP PE can pack PE PP
功能Function
产品应用 main application		1运动器材Exercise				3电子产品Electrical products
		2汽车用品Automotive products				4玩具产品Toy products
加工方法Processing method		注塑、挤出成型Injection molding and extrusion molding
环保认证 Environmental certification		ROHS		REACH				EN71-3
		PAHS		ASTM-F963				Phthalate
颜色Color		透明Transparent;
气味Smell		少许树脂味A little resin smell
外型Appearance		圆球形小颗粒Cylindrical particle，about 3mm×1.5mm
储藏期Storage period		常温下通风干燥，24个月Ventilated dry at normal temperature，about 24 months
包装方式Packaging method		25公斤/袋 25kg/bag
物理性能Physical properties		结果Result	单位Unit		方法Method		成型条件Molding condition
比重Specific gravity		0.9±0.02	g/cm3		ASTM D792		干燥温度Drying temp 70℃
硬度Hardness		75±5	shoreA		ASTM D2240		干燥时间Drying time 2Hours
拉伸强度Tensile strength		>7	Mpa		ASTM D412		射嘴温度Nozzle temp 200℃
断裂延伸Elongation at break		>500	%		ASTM D412		螺筒一段温度Screw 1 temp 190℃
撕裂强度Tearing strength		>35	Kn/m		ASTM D624		螺筒二段温度Screw 2 temp 180℃
熔融指数Melt index		<10	g/10min		ASTM D1238		螺筒三段温度Screw 3 temp 170℃
注意事项Matters need attention
清洗料管 Purge compound	需使用PP或 PE清洗干净机台螺杆，且把机台射嘴彻底清除干净please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean
着色 Coloring	请选择以PE或EVA为基材之色母，切勿使用以PVC为基材者。另外加工时请采用较高的螺杆转速和较高的背压，才能让着色剂达到较好的分散效果Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed and backpressure and needed for better colorant dispersion
回收 Recycling	二次料（水口料）回收比率建议最多20%。 Consistent regrind usage of up to 20% is permissible