TPE透明软胶 TST1600B-2 TPE软胶仿真人体原料厂家直销

·ES95A-TZ是一款以SEBS为主材的透明热塑性弹性体。 ·ES95A-TZis a kind of thermoplastic elastomer material based on SEBS as main material.

产品描述

　　医用TPE需满足下列基本条件

　　1、在化学上是惰性的，不会因与体液接触而发生反应;

　　2、对人体组织不会引起炎症和异物反应;

　　2、不会致癌;

　　3、不会发生变态反应性的过敏反应;

　　4、具有良好的血液相容性，不溶血，不凝血;

　　5、长期植入体内，也不会丧失拉伸强度和弹性等物理机械性能;

　　6、能经受必要的消毒措施而不变形;

　　7、易于加工成所需要的、复杂的形状

倍韧/BESTPERNE® ES95A-TZ

热塑性弹性体Thermoplastic Elastomer

产品说明Product description
·ES95A-TZ是一款以SEBS为主材的透明热塑性弹性体。 ·ES95A-TZis a kind of thermoplastic elastomer material based on SEBS as main material.
关键特性Key characteristic
1.透明度高High transparent. 2.抗老化及耐腐蚀性优良Excellent ageing resistance and corrosion resistance. 3表面哑面，手感柔软Dumb surface，soft touch. 4.可以包PP It can be spliced with PP.
功能Function
产品应用 Main application		电子产品Electrical products				医疗器材Medical device
		玩具产品Toy products				高档手柄High-end handles
加工方法Processing method		注塑成型Injection molding
环保认证 Environmental certification		ROHS		REACH				EN71-3
		PAHS		ASTM-F963				Phthalate
颜色Color		透明Transparent
气味Smell		少许树脂味A little resin smell
外型Appearance		圆球形小颗粒Cylindrical particle，about 3mm×1.5mm
储藏期Storage period		常温下通风干燥，12个月Ventilated dry at normal temperature，about 12 months
包装方式Packaging method		25公斤/袋 25kg/bag
物理性能Physical properties		结果Result	单位Unit		方法Method		成型条件Molding condition
比重Specific gravity		0.9±0.02	g/cm3		ASTM D792		干燥温度Drying temp 80℃
硬度Hardness		40±3D	shoreD		ASTM D2240		干燥时间Drying time 2Hours
拉伸强度Tensile strength		>7	Mpa		ASTM D412		射嘴温度Nozzle temp 200℃
断裂延伸Elongation at break		<500	%		ASTM D412		螺筒一段温度Screw 1 temp 190℃
撕裂强度Tearing strength		>50	Kn/m		ASTM D624		螺筒二段温度Screw 2 temp 170℃
熔融指数Melt index		>5	g/10min		ASTM D1238		螺筒三段温度Screw 3 temp 160℃
注意事项Matters need attention
清洗料管 Purge compound	需使用PP或 PE清洗干净机台螺杆，且把机台射嘴彻底清除干净Please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean.
着色 Coloring	请选择以PE或EVA为基材之色母，切勿使用以PVC为基材者。另外加工时请采用较高的螺杆转速和较高的背压，才能让着色剂达到较好的分散效果Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed and backpressure are needed for better colorant dispersion.
回收 Recycling	二次料（水口料）回收比率建议最多20%. Consistent regrind usage of up to 20% is permissible.