PP油性母粒S0511 油性测试专用母粒
技术资料表
Technical Data Sheet(TDS)
产品信息 Product information |
|||||||
品牌 Brand |
易来极 ELE KEY |
材料类型 Material Type |
PP油性母粒 PP Oiliness Masterbatch |
牌号 Geade |
S0511 |
||
特性 Characteristic |
·亲油配方,提高油性颗粒物Lipophilic formula to improve oily particles |
||||||
·分散性能极佳Excellent dispersion |
|||||||
·稳定出丝Stable filament |
|||||||
·增大调机工艺参数窗口Increase the window of adjusting process parameters |
|||||||
外观 Appearance |
·圆柱状 3.5-8mm Cylindrical shape |
||||||
颜色 Colour |
·本白色 Natural |
||||||
气味 Smell |
·接近无味 Almost tasteless |
||||||
包装Packing |
·25KG/包 KG/ package |
||||||
用途Applications |
·熔喷无纺布 Melt Blown Monwoven |
||||||
·与绝大多数的熔喷聚丙烯相熔性良好,直接添加,提高油性颗粒物过滤量,改善发硬变脆现象It has good fusibility with the majority of melt blown polypropylene and can be directly added to improve the filtration amount of oily particles and improve the hardening and embrittlement |
|||||||
通用性能 General Properties |
|||||||
序号 No. |
性能 Properties |
测试值 Value |
单位 Unit |
检验方法 Method |
测试条件 Test conditon |
||
1 |
熔体流动速率Melt Flow Index |
200±100 |
g/10min |
GB/T 3682 |
230℃,2.16kg |
||
2 |
熔点Melting Point |
160 |
℃ |
GB/T 19466 |
10℃/min |
||
3 |
含水量Water content |
< 0.03 |
% |
GB/T 6283-2008 |
23℃ 75% |
||
4 |
密度density |
0.90 |
g/cm3 |
GB/T 4472-2011 |
23℃ 75% |
||
5 |
建议添加量Recommended addition 10-20% |
||||||
备注 Remarks
|
塑伯S0511油性颗粒物过滤量提升母粒是针对大部分客户对于油性颗粒物过滤量要求(FFP2标准)推出的新产品。采用亲油性的配方工艺,均匀分散于PP(聚丙烯)载体中,成丝后对油性颗粒物具有同性相吸效应,对过滤量的提升与添加量成正比例(建议添加20%以下),随着添加比例增加,熔体流动性降低,故成型温度应同步提高。 SPP S0511 oil particle filter quantity promotion masterbatch is a new product launched for most customers' requirements for oil particle filter quantity (FFP2 standard).The formulation process with lipophilic property is adopted, which is evenly dispersed in PP (polypropylene) carrier. After being spun, it has the same phase absorption effect on oily particles. The increase of filtration amount is in positive proportion to the addition amount (it is suggested to add less than 20%). With the increase of the addition proportion, the melt fluidity decreases, so the molding temperature should be increased synchronously. |
以上数据为我公司测量之理论数据仅供参考,版权所有@广东塑伯新材料有限公司
The above data for the theory of the measurement data of our company, for your reference only. Copyright @ SPP New
↵Copyright © 2021 广东塑伯新材料有限公司
All Rights Reserved. 粤ICP备2020127300号
销售热线:400-800-0302 手机:13602342196 电话:0752-6768128 传真:0752-6768088
地址:广东省惠州市博罗县石湾镇黄西工业园径二路 邮箱:sales@tpe-sp.com 网址:www.tpe-sp.com