undefined
+
  • undefined

东莞资深TPU厂家_TPU_TPU牌号TPU包PCTPU原料厂家 EN85A6-01

EN85A6-01是一款以SEBS为主基材的热塑性弹性体,成型快，好配色。 EN85A6-01is a kind of thermoplastic elastomer material based on SEBS as main material.Also it has rapid molding and easy coloring properties.
  • 产品描述

  • 倍韧/BESTPERNE® EN85A6-01

    热塑性弹性体Thermoplastic Elastomer

    产品说明Product description

    EN85A6-01是一款以SEBS为主基材的热塑性弹性体,成型快，好配色。

    EN85A6-01is a kind of thermoplastic elastomer material based on SEBS as main material.Also it has rapid molding and easy coloring properties.

     

    关键特性Key characteristic

    1.手感柔软细腻，干爽，耐刮擦性好。Exquisite， soft and dry touch，good scratch resistance.

    2.抗老化及耐腐蚀性优良。Excellent ageing resistance and corrosion resistance

    3.可以包PP,PE   It can be spliced with PP and PE

    功能Function

    产品应用

    Main application

    1 汽车用品 Automotive products

    3手把Handlebar

    2 运动器材Sports equipment

    4玩具产品Toy products

    加工方法Processing method

    注塑成型Injection molding 

    环保认证

    Environmental certification

    ROHS

    REACH

    EN71-3

    PAHS

    ASTM-F963

    Phthalate

    颜色Color

    本色 Natural

    气味Smell

    少许树脂味A little resin smell

    外型Appearance

    圆球形小颗粒Cylindrical particle，about 3mm×1.5mm

    储藏期Storage period

    常温下通风干燥，24个月Ventilated dry at normal temperature，about 24 months

    包装方式Packaging method

    25公斤/袋 25kg/bag

    物理性能Physical properties

    结果Result

    单位Unit

    方法Method

    成型条件Molding condition

    比重Specific gravity

    0.96±0.02

    g/cm3

    ASTM D792

    干燥温度Drying temp       70℃

    硬度Hardness

    85±5

    shoreA

    ASTM D2240

    干燥时间Drying time     2Hours

    拉伸强度Tensile strength

    >5

    Mpa

    ASTM D412

    射嘴温度Nozzle temp      200℃

    断裂延伸Elongation at break

    >200

    %

    ASTM D412

    螺筒一段温度Screw 1 temp 190℃

    撕裂强度Tearing strength

    >30

    Kn/m

    ASTM D624

    螺筒二段温度Screw 2 temp 180℃

    熔融指数Melt index

    >8

    g/10min

    ASTM D1238

    螺筒三段温度Screw 3 temp 170℃

    注意事项Matters need attention

    清洗料管

    Purge compound

    需使用PP或 PE清洗干净机台螺杆，且把机台射嘴彻底清除干净Please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean

    热塑性橡胶硬度范围：

    　　一般的橡胶硬度范围在30~90A.除了硬度外，考虑到橡胶的质感，如耐磨、摩擦、止滑特性。该硬度段的SEBS体系、SBS体系、热塑性聚氨酯体系、EPDM+PP体系等，都可以划分为热塑性橡胶（TPR)的范畴。不过对于聚烯烃弹性体TPO和海翠TPEE,虽然其低硬度段符合橡胶的硬度范围，但由于其缺乏橡胶的摩擦和止滑特性，塑伯不将其列为热塑性橡胶范畴。
     

     

    关键词:
    • astm
    • 温度
    • and
    • temp
    • pp
    • screw
    • pe
    • molding
    • method

相关产品