TPR专业网站|TPR|苏州TPR供应厂家 tpr材料箱包轮子

EN70A-11是一款以SEBS为主基材的热塑性弹性体,成型快，好配色。 EN70A-11 is a kind of thermoplastic elastomer material based on SEBS as main material.Also it has rapid molding and easy coloring properties.

产品描述

倍韧/BESTPERNE® EN70A-11

热塑性弹性体Thermoplastic Elastomer

产品说明Product description
EN70A-11是一款以SEBS为主基材的热塑性弹性体,成型快，好配色。 EN70A-11 is a kind of thermoplastic elastomer material based on SEBS as main material.Also it has rapid molding and easy coloring properties.
关键特性Key characteristic
1.手感柔软细腻，干爽，耐刮擦性好。Exquisite， soft and dry touch，good scratch resistance. 2.抗老化及耐腐蚀性优良。Excellent ageing resistance and corrosion resistance 3.可以包PP,PE It can be spliced with PP and PE
功能Function
产品应用 Main application		1 汽车用品 Automotive products				3手把Handlebar
		2 运动器材Sports equipment				4玩具产品Toy products
加工方法Processing method		注塑成型Injection molding
环保认证 Environmental certification		ROHS		REACH				EN71-3
		PAHS		ASTM-F963				Phthalate
颜色Color		本色 Natural
气味Smell		少许树脂味A little resin smell
外型Appearance		圆球形小颗粒Cylindrical particle，about 3mm×1.5mm
储藏期Storage period		常温下通风干燥，24个月Ventilated dry at normal temperature，about 24 months
包装方式Packaging method		25公斤/袋 25kg/bag
物理性能Physical properties		结果Result	单位Unit		方法Method		成型条件Molding condition
比重Specific gravity		1.07±0.02	g/cm3		ASTM D792		干燥温度Drying temp 70℃
硬度Hardness		70±5	shoreA		ASTM D2240		干燥时间Drying time 2Hours
拉伸强度Tensile strength		>3	Mpa		ASTM D412		射嘴温度Nozzle temp 190℃
断裂延伸Elongation at break		>400	%		ASTM D412		螺筒一段温度Screw 1 temp 180℃
撕裂强度Tearing strength		>20	Kn/m		ASTM D624		螺筒二段温度Screw 2 temp 170℃
熔融指数Melt index		>30	g/10min		ASTM D1238		螺筒三段温度Screw 3 temp 160℃
注意事项Matters need attention
清洗料管 Purge compound	需使用PP或 PE清洗干净机台螺杆，且把机台射嘴彻底清除干净Please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean
着色 Coloring	请选择以PE或EVA为基材之色母，切勿使用以PVC为基材者。另外加工时请采用较高的螺杆转速和较高的背压，才能让着色剂达到较好的分散效果Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed and backpressure are needed for better colorant dispersion
回收 Recycling	二次料（水口料）回收比率建议最多20%。 Consistent regrind usage of up to 20% is permissible

减少tpe材料气味的小细节

　　TPE之所以会有气味，主要是高温共混或加工组分小分子挥发所致。建议如下：

　　1.TPE配混体系，尽量选择VOC挥发小的操作油及加工助剂。操作油应选择氢化度高的品种。

　　2.TPE共混料。充分冷却后打包，料粒的气味会小些。

　　3.TPE制品加工。高温注塑成型，气味难免，油的含量越大，气味越大。但加工成品冷却后，制品气味会慢慢变淡。

关键词:

astm
and
pe
screw
温度
temp
pp
en70a-11
20

TPR专业网站|TPR|苏州TPR供应厂家 tpr材料 箱包轮子

TPR专业网站|TPR|苏州TPR供应厂家 tpr材料箱包轮子