tpe胶料 tpe胶料价格 TFU7066

 
产品编号:
TFU7066
·TFU7066是一款新型的高分子复合材料,韧性和强度平衡,耐磨,抗污,丝滑细腻,超耐黄变,耐化学性,导热性符合穿戴产品的要求TFU7066  is a new kind of polymer composite material which has balanced toughness and strength ,excellent wear resistance,stain resistance ,yellowing resistance,chemical resistance,smooth and exquisite touch and high thermal conductivity. Also it is very suitable for wearable products.
 
产品描述

倍韧/BESTPERNE®    TFU7066

热塑性弹性体Thermoplastic Elastomer

产品说明Product description

·TFU7066是一款新型的高分子复合材料,韧性和强度平衡,耐磨,抗污,丝滑细腻,超耐黄变,耐化学性,导热性符合穿戴产品的要求TFU7066  is a new kind of polymer composite material which has balanced toughness and strength excellent wear resistancestain resistance yellowing resistancechemical resistancesmooth and exquisite touch and high thermal conductivity. Also it is very suitable for wearable products.

关键特性Key characteristic

1.舒适的触感,柔韧细腻、爽滑Comfortable feelflexible exquisite and smooth touch.

2.粘接强度高可粘接材质ABSPCTPU  Very high bonding strengthadhesive materialsABSPCTPU.

3.实用性,耐脏、耐油、耐汗、耐菌、耐变色It is very practicalfor excellent stain resistanceoil resistancesweat resistance bacteria resistance and discoloration resistance.

4.具有TPU的强度,耐磨和硅胶的柔韧细腻The strength of TPUexquisite and flexible touch are similar to Silicone.

5.绝对可靠的安全性,无毒、过敏性Reliable security non-toxicnon-allergic.

功能Function

产品应用

Main application

手腕带Wirst bands

高档手机护套High-end phone protective covers

医疗器材Medical device

电子器件粘胶配件Electronic plastic accessories

加工方法Processing method

注塑成型Injection molding

环保认证

Environmental certification

ROHS

REACH

EN71-3

PAHS

ASTM-F963

Phthalate

颜色Color

半透明 Translucent

气味Smell

少许树脂味A little resin smell

外型Appearance

圆球形小颗粒Cylindrical particleabout 3mm×1.5mm

储藏期Storage period

常温下通风干燥,12个月Ventilated dry at normal temperatureabout 12 months

包装方式Packaging method

25公斤/25kg/bag

物理性能Physical properties

结果Result

单位Unit

方法Method

成型条件Molding condition

比重Specific gravity

1.06±0.02

g/cm3

ASTM D792

干燥温度Drying temp       90

硬度Hardness

72±5

shoreA

ASTM D2240

干燥时间Drying time     2Hours

拉伸强度Tensile strength

14±2

Mpa

ASTM D412

射嘴温度Nozzle temp      180

断裂延伸Elongation at break

700±100

%

ASTM D412

螺筒一段温度Screw 1 temp 170

撕裂强度Tearing strength

55±5

Kn/m

ASTM D624

螺筒二段温度Screw 2 temp 160

熔融指数Melt index

16±4

g/10min

ASTM D1238

螺筒三段温度Screw 3 temp 160

注意事项Matters need attention

清洗料管

Purge compound

需使用PPPE清洗干净机台螺杆,且把机台射嘴彻底清除干净Please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean.

着色

Coloring

请选择以PEEVA为基材之色母,切勿使用以PVC为基材者。另外加工时请采用较高的螺杆转速和较高的背压,才能让着色剂达到较好的分散效果Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed and backpressure are needed for better colorant dispersion.

以上数据为我公司测量之理论数据仅供参考,版权所有@惠州塑伯新材料有限公司The above data for the theory of the measurement data of our company, for your reference only. Copyright @ Huizhou SPP New Material Co., Ltd.   

塑伯TPE
塑伯橡塑胶
智能穿戴硬件联盟

  Copyright © 2021 广东塑伯新材料有限公司

All Rights Reserved. 粤ICP备2021071326号

销售热线:400-800-0302      手机:13602342196       电话:0752-6768128       传真:0752-6768088

地址:广东省惠州市博罗县石湾镇黄西工业园径二路  邮箱:sales@tpe-sp.com   网址:www.tpe-sp.com