色母粒_塑胶色母粒_色母粒TPU厂家色母,塑料色母,多彩色母

45T是一款经济型半透明材料，具有优异的耐刮擦效果。 45T is a kind of economical and translucent material which has excellent scratch resistance property.

产品描述

倍韧®/BESTPERNE® 45T

热塑性弹性体Thermoplastic Elastomer

产品说明Product description
45T是一款经济型半透明材料，具有优异的耐刮擦效果。 45T is a kind of economical and translucent material which has excellent scratch resistance property.
关键特性Key characteristic
1.表面哑，手感细腻柔软Dumb surface， exquisite and soft touch. 2.粘接强度非常高,可粘接材质:PP,PE. Very high bonding strength，adhesive materials：PP and PE. 3.成型快、不粘模具Rapid molding and non-stick mold. 4.表面耐刮擦，不易起毛屑Scratch resistance on the surface，not easy to fluff.
功能Function
产品应用 Main application		饭盒盖包胶Rubber coating of lunch-box cover
		玩具产品Toy products				电子器件粘胶配件Electronic plastic accessories
加工方法Processing method		注塑成型Injection molding
环保认证 Environmental certification		ROHS		REACH				EN71-3
		PAHS		ASTM-F963				Phthalate
颜色Color		半透明 Translucent
气味Smell		少许树脂味A little resin smell
外型Appearance		圆球形小颗粒Cylindrical particle，about 3mm×1.5mm
储藏期Storage period		常温下通风干燥，24个月Ventilated dry at normal temperature，about 24 months
包装方式Packaging method		25公斤/袋 25kg/bag
物理性能Physical properties		结果Result	单位Unit		方法Method		成型条件Molding condition
比重Specific gravity		0.89±0.02	g/cm3		ASTM D792		干燥温度Drying temp 70 ℃
硬度Hardness		45±5	shoreA		ASTM D2240		干燥时间Drying time 2h
拉伸强度Tensile strength		>3	Mpa		ASTM D412		射嘴温度Nozzle temp 200℃
断裂延伸Elongation at break		>450	%		ASTM D412		螺筒一段温度Screw 1 temp 190℃
撕裂强度Tearing strength		>12	Kn/m		ASTM D624		螺筒二段温度Screw 2 temp 180℃
熔融指数Melt index		>5	g/10min		ASTM D1238		螺筒三段温度Screw 3 temp 170℃
注意事项Matters need attention
清洗料管 Purge compound	需使用PP或 PE清洗干净机台螺杆，且把机台射嘴彻底清除干净Please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean.
着色 Coloring	请选择以PE或EVA为基材之色母，切勿使用以PVC为基材者。另外加工时请采用较高的螺杆转速和较高的背压，才能让着色剂达到较好的分散效果Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed and backpressure are needed for better colorant dispersion.
回收 Recycling	二次料（水口料）回收比率建议最多20%. Consistent regrind usage of up to 20% is permissible.