undefined
+
  • undefined

软胶玩具公仔TPE 35N 厂家直供价格实惠TPE玩具原料

ZF45B是一款减震高分子材料，耐候性，耐油，耐化学性能优。减震率可达15%，可注塑成型。 ZF45B is a shock-absorbing polymer materials, durability, oil resistance, high chemical resistance. Shock absorption rate of up to 15% can be injection molded.
  • 产品描述

  • 倍韧/BESTPERNE® ZF45B

    热塑性弹性体Thermoplastic Elastomer

    产品说明Product description

    ZF45B是一款减震高分子材料，耐候性，耐油，耐化学性能优。减震率可达15%，可注塑成型。

    ZF45B is a shock-absorbing polymer materials, durability, oil resistance, high chemical resistance. Shock absorption rate of up to 15% can be injection molded.

    关键特性Key characteristic

    1.表面微亮，手感细腻柔软爽滑.              a little bright on the surface，exquisite，smooth and soft touch feeling.

    2.超耐磨高强度,高回复性,抗变形excellent wear resistance and deformation resistance，high strength and resilience.

    3.成型快、不粘模具.rapid molding，non-stick mold. 

    4.阻尼效果优异.    Damping effect is good.

    功能Function

    产品应用

    Main application

    手机保护套Phone protective cover

    仪器外壳Instrument shell

    电子器件粘胶配件Electronic plastic accessories

    加工方法Processing method

    注塑、挤出成型Injection and extrusion molding

    环保认证

    Environmental certification

    ROHS

    REACH

    EN71-3

    PAHS

    ASTM-F963

    Phthalate

    颜色Color

    本色Natural

    气味Smell

    少许树脂味A little resin smell

    外型Appearance

    圆球形小颗粒Cylindrical particle，about 3mm×1.5mm

    储藏期Storage period

    常温下通风干燥，24个月Ventilated dry at normal temperature，about 24 months

    包装方式Packaging method

    25公斤/袋 25kg/bag

    物理性能Physical properties

    结果Result

    单位Unit

    方法Method

    成型条件Molding condition

    比重Specific gravity

    1.±0.02

    g/cm3

    ASTM D792

    干燥温度Drying temp     60 ℃

    硬度Hardness

    46±5

    shoreA

    ASTM D2240

    干燥时间Drying time      3h

    拉伸强度Tensile strength

    >3

    Mpa

    ASTM D412

    射嘴温度Nozzle temp     200℃

    断裂延伸Elongation at break

    >400

    %

    ASTM D412

    螺筒一段温度Screw 1 temp 190℃

    撕裂强度Tearing strength

    >12

    Kn/m

    ASTM D624

    螺筒二段温度Screw 2 temp 180℃

    熔融指数Melt index

    >3

    g/10min

    ASTM D1238

    螺筒三段温度Screw 3 temp 170℃

    注意事项Matters need attention

    清洗料管

    Purge compound

    需使用PP或 PE清洗干净机台螺杆，且把机台射嘴彻底清除干净please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean

    着色

    Coloring

     

     

    请选择以PE或EVA为基材之色母，切勿使用以PVC为基材者。另外加工时请采用较高的螺杆转速和较高的背压，才能让着色剂达到较好的分散效果Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed and backpressure and needed for better colorant dispersion

    回收

    Recycling

    二次料（水口料）回收比率建议最多20%。

    Consistent regrind usage of up to 20% is permissible

    以上数据为我公司测量之理论数据仅供参考，版权所有@

    The above data for the theory of the measurement data of our company, for your reference only. Copyright @

    关键词:
    • the
    • and
    • astm
    • screw
    • 温度
    • of
    • temp
    • 成型
    • pe
    • tpe橡胶料

相关产品