热塑性弹性体TPEE 医疗级防尘面罩食品级弹性好

TE9000P是一款高性能弹性体材料，具有优异的耐候、耐老化性能. TE9000Pis a high performance elastomer material with excellent weather resistance and aging resistance.

产品描述

倍韧/BESTPERNE® TE9000P

热塑性弹性体Thermoplastic Elastomer

产品说明Product description
·TE9000P是一款高性能弹性体材料，具有优异的耐候、耐老化性能. TE9000Pis a high performance elastomer material with excellent weather resistance and aging resistance.
关键特性Key characteristic
1.良好的低温抗冲击性Good low temperature resistance and impact resistance. 2.极好的回弹性和柔软性Excellent resilience and soft touch. 3.耐候性好，耐油，耐化学性Good weather resistance, oil resistance, chemical resistance
功能Function
产品应用 Main application		电线电缆				体育器材Sports goods
		家用电器Household appliances
加工方法Processing method		挤出成型
环保认证 Environmental certification		ROHS		REACH				EN71-3
		PAHS		ASTM-F963				Phthalate
颜色Color		透明
气味Smell		少许树脂味A little resin smell
外型Appearance		圆球形小颗粒Cylindrical particle，about 3mm×1.5mm
储藏期Storage period		常温下通风干燥，12个月Ventilated dry at normal temperature，about 12 months
包装方式Packaging method		25公斤/袋 25kg/bag
物理性能Physical properties		结果Result	单位Unit		方法Method		成型条件Molding condition
比重Specific gravity		0.89±0.02	g/cm3		ASTM D792		干燥温度Drying temp
硬度Hardness		90±5	shoreA		ASTM D2240		干燥时间Drying time
拉伸强度Tensile strength		>5	Mpa		ASTM D412		射嘴温度Nozzle temp 190℃
断裂延伸Elongation at break		>600	%		ASTM D412		螺筒一段温度Screw 1 temp 180℃
撕裂强度Tearing strength		>30	Kn/m		ASTM D624		螺筒二段温度Screw 2 temp 170℃
熔融指数Melt index		＞1	g/10min		ASTM D1238		螺筒三段温度Screw 3 temp 160℃
注意事项Matters need attention
清洗料管 Purge compound	需使用PP或 PE清洗干净机台螺杆，且把机台射嘴彻底清除干净Please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean.
着色 Coloring	请选择以PE或EVA为基材之色母，切勿使用以PVC为基材者。另外加工时请采用较高的螺杆转速和较高的背压，才能让着色剂达到较好的分散效果Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed and backpressure are needed for better colorant dispersion.
回收 Recycling	二次料（水口料）回收比率建议最多20%. Consistent regrind usage of up to 20% is permissible.