热塑性弹性体TPE 阻燃线材无卤手感爽滑

TA45G-01是一款高性能，低硬度的高分子材料，具有非常强劲的包胶粘接强度和特别舒适的手感。 ·TA45G-01 is a kind of high performance and low hardness polymer material which has very strong bonding strength and special comfortable touch.

产品描述

倍韧/BESTPERNE® TA45G-01

热塑性弹性体Thermoplastic Elastomer

产品说明Product description
·TA45G-01是一款高性能，低硬度的高分子材料，具有非常强劲的包胶粘接强度和特别舒适的手感。 ·TA45G-01 is a kind of high performance and low hardness polymer material which has very strong bonding strength and special comfortable touch.
关键特性Key characteristic
1.表面哑，手感细腻柔软Dumb surface， exquisite and soft touch. 2.粘接强度非常高,可粘接材质：ABS，PC Very high bonding strength, adhesive materials: ABS, PC. 3.成型快、不粘模具Rapid molding，non-stick mold. 4.表面耐刮擦，不易起毛屑Scratch resistance on the surface,not easy to fluff.
功能Function
产品应用 Main application		医疗器材Medical device				电脑Computer
		仪器外壳Instrument shell				电子器件粘胶配件Electronic plastic accessories
加工方法Processing method		注塑成型Injection molding
环保认证 Environmental certification		ROHS		REACH				EN71-3
		PAHS		ASTM-F963				Phthalate
颜色Color		本色 Natural
气味Smell		少许树脂味A little resin smell
外型Appearance		圆球形小颗粒Cylindrical particle，about 3mm×1.5mm
储藏期Storage period		常温下通风干燥，24个月Ventilated dry at normal temperature，about 24 months
包装方式Packaging method		25公斤/袋 25kg/bag
物理性能Physical properties		结果Result	单位Unit		方法Method		成型条件Molding condition
比重Specific gravity		1.06±0.02	g/cm3		ASTM D792		干燥温度Drying temp 90℃
硬度Hardness		48±5	shoreA		ASTM D2240		干燥时间Drying time 2Hours
拉伸强度Tensile strength		＞4	Mpa		ASTM D412		射嘴温度Nozzle temp 190℃
断裂延伸Elongation at break		＞450	%		ASTM D412		螺筒一段温度Screw 1 temp 180℃
撕裂强度Tearing strength		＞25	Kn/m		ASTM D624		螺筒二段温度Screw 2 temp 170℃
熔融指数Melt index		＞3	g/10min		ASTM D1238		螺筒三段温度Screw 3 temp 160℃
注意事项Matters need attention
清洗料管 Purge compound	需使用PP或 PE清洗干净机台螺杆，且把机台射嘴彻底清除干净Please make sure you that you have cleaned the machine screw with PP or PE, and put the machine nozzle thoroughly clean.
着色 Coloring	请选择以PE或EVA为基材之色母，切勿使用以PVC为基材者。另外加工时请采用较高的螺杆转速和较高的背压，才能让着色剂达到较好的分散效果Please select color master batch on PE or EVA material with the exception of PVC.Higher screw speed and backpressure are needed for better colorant dispersion.
回收 Recycling	二次料（水口料）回收比率建议最多20%. Consistent regrind usage of up to 20% is permissible.